UPS EPS Valve Regulated Lead Acid Battery 12V 25AH For High Rate Demand
1.Oxygen recombination:Sealed and maintenance-free.
2.High qulified AGM separator with Pb-Ca alloy plate.
3.Low self-discharge Flame-retardant.
4.ABS case Sealed construction and non-spillable.
5.Can be mounted on multi-position.
6.Working temperature range: -20'C~+50'C.
7.Long service life, more than 12 months storage.
8.Superior high rate discharge performance and cycle character.
9.More and faster starting power over conventional batteries
|Nominal Voltage||12V||Nominal Capacity (C20)||25Ah (10.5V, at 25℃)|
|Nominal Power(15min)||103W/Cell (10.02V, at 25℃)||Weight||Approx. 9.98kg|
|Width 175mm||Internal Resistance||Approx. 15 mΩ (25℃)|
|Height 125mm||Max Charging Current||7.5A (25℃)|
|Total Height 125mm||Max Short-duration Discharge Current||750A(25℃)|
|Charging Voltage||Standby Use||2.275±0.025V/cell (25℃)||Temperature Compensation||Standby Use||-3.3mV/℃/cell|
|Cyclic Use||2.45±0.05V/cell (25℃)||Cyclic Use||-5mV/℃/cell|
Feature & Advantage
1.The battery is full of power when it’s out of factory, no need to use liquid
2.no memory, no need to discharge battery use, suitable for circuit design.
3.by high partition, adsorption and strong.
4.there is no flowing liquid (poor liquid), does not leak acid and free Upside
5.comply with environmental requirements, ease of use.
6.the use of lead-calcium alloys, battery self-discharge is very low.
7.easy storage, less maintenance.
8.using ABS plastic shell and valve technology for safe use.
Alarm & Security system
Emergency Power Systerm
Fire-safety Emergency System
Banks & Financial Centre
Hospital& Testing Laboratories
Batteries should be stored in dry and clean warehouse which has good air
Batteries should avoid direct sunlight. Batteries should not be near to heat
(such as radiator, the distance should more than 1m).
Batteries should avoid any toxic gas and organic solvent.
Batteries should be recharged within the storage life or before using.